| one publication added to basket [355400] | Overflow tests on grass-covered embankments at the living lab Hedwige-Prosperpolder: an overview
Koelewijn, A.; Rikkert, S.J.H.; Peeters, P.; Depreiter, D.; van Damme, M.; Zomer, W. (2022). Overflow tests on grass-covered embankments at the living lab Hedwige-Prosperpolder: an overview. Water 14(18): 2859. https://dx.doi.org/10.3390/w14182859
Is gerelateerd aan:Koelewijn, A.; Rikkert, S.; Peeters, P.; Depreiter, D.; Van Damme, M.; Zomer, W. (2022). Overflow tests on Grass-Covered embankments at the Living Lab Hedwige-Prosperpolder: An overview [PRESENTATION]. Presented at the 4th International seminar on Dam protections against Overtopping, 30/11-02/12-2022, Madrid. Interreg 2 Seas Mers Zeeën Polder2C's: [s.l.]. 21 slides pp., meer
|   |
| Trefwoorden |
Erosion
Grass
Hydraulic structures > Dikes, shores and other flood defenses > Erosion protection
Hydraulic structures > Dikes, shores and other flood defenses > Failure mechanisms
In situ tests > Field tests
In-situ measurements
Overtopping
|
| Auteurs | | Top |
- Koelewijn, A.
- Rikkert, S.J.H.
- Peeters, P., meer
|
- Depreiter, D., meer
- van Damme, M.
- Zomer, W.
|
|
| Abstract |
In regions with a temperate climate, a well-maintained grass sod on a clay layer is considered a reliable protection for dams and dikes. In the Living Lab Hedwige-Prosperpolder, on the left bank of the Scheldt river straddling the border between Belgium and the Netherlands, a series of 27 overflow tests with a purpose-built overflow generator has been executed to determine the strength of the protective layer against erosion at various conditions. The goal of this paper is to inform on the executed test program and the initial results. From the results, it was concluded that in general, a high-quality grass cover on the landside dike slope can withstand high overflow discharges well for 12 to 30 h, without severe erosion damage. Anomalies, such as the presence of animal burrows, reed vegetation, and already present deformations can strongly reduce the resistance of the cover layer and may lead to failure within a couple of hours. |
|
